9
STAGE PRO
Multifunctional Wireless Mixer Amplifier
Tone control
For wired and wireless microphone(s)
For music
Operating Voice Priority
Voice Priority operation is only necessary when CD/USB/MP3 is playing.
When the Voice Priority switch is ON, the ducking function will be activated.
While the music is playing, a voice input from either a Wired or Wireless
Microphone will temporarily override and lower the volume of the
background music and voice could be heard more clearly.
Background music will return to its original setting when no audio input is
entering the microphone for a certain time. However, if the microphone is
not switch off, the reentering of music into the microphone will also activate
the voice priority function.
Operating Loudness
When the amplifier’s sound is at low level, the tone might not be heard
clearly and activating the Loudness function can raise the tone level to
make it clearer.
Limiter Function
There’s an interior anti-overload circuit to protect the amplifier from being damaged due to over
volume output, this design will automatically lower the output when it goes over the limit.
Charging the battery
This amplifier uses either two lead-acid batteries or one lithium battery. The
battery power is leveled from 40%, 60%, 80% and FULL. If the LED stays
at 40%, the battery might not be sustainable for long operation.
During recharging
: LED flashes RED
Fully charged
: LED grows GREEN
Wrong or no battery detected
: LED grows YELLOW.
