2
Instructions
Battery installation & indicator
●
►
○
●
When the transmitter is switched ON, a red
LED will blink once to denote the batteries
installed are in good condition.
If the LED remains illuminated, it means the
batteries are weak and require replacement.
This transmitter requires 2 x AA batteries to
operate.
To install, remove the battery cover and slide
the batteries into the battery compartment &
replace the battery cover.
Note
: Batteries contain a corrosive acid that may leak and damage the microphone when stored for a long
period. Batteries should be removed from the microphone before storing without use for more than 4 weeks.
Channel setting
Please use the attached small screw driver to set the channel
SQ-1016 / SQ-1016V
SM-1016
SM-2016
GAIN setting (SM-1016
｜
SM-2016)
Gain control enables the user to set different output levels.
SM-1016
SM-2016
GT
(LEFT) is for the use of instrument with
high impedance, such as guitar.
MT
(RIGHT)is for the use of low impedance
such as lapel or headset microphones
GT MT
GT
MT
GT MT
GT
MT
GT
MT
GT
MT
