ISO 9001
｜
ISO 14001
｜
OHSAS 18001
-10-
Belt-pack transmitters
（
M-815
｜
M-1005
）
Transmitter parts and functions
M-818
M-1005
Ante nna 1
-
Battery weak indicator
2
2
Power switc h
3
3
(Lava lier microp ho ne) Mini XLR connec tor
4
4
Cover re lease b utto n
5
5
Gain co ntrol (GT, high impedance)
6
6
Gain co ntrol (MT, low impeda nce)
7
7
Battery compartme nt
8
8
Charging co ntacts
9
9
Battery installation & indicator
This belt-pack requires 2 x AA batteries to operate.
To install, open the battery cover using the cover release buttons and insert the batteries into
the battery compartment.
Note
: Batteries contain a corrosive acid that may leak and damage the belt-pack when stored
for a long period. Batteries should be removed from the belt-pack before storing without use for
more than 4 weeks.
When the transmitter is switched ON, the battery power LED
will blink once to indicate the
batteries installed are in good condition.
If the LED remains illuminated the batteries have
expired and require replacement.
GAIN setting
Please use the attached small screw driver to set the GAIN level. Gain control is an adjustable
design that enables user to set different output levels. GT is for the use of instrument with high
impedance, such as guitar while MT is for the use of low impedance such as lavalier or headset
microphone.
1
2 3
4
5
6 7
8
9
9
