ISO 9001
｜
ISO 14001
｜
OHSAS 18001
-2-
Changing CHANNEL / FREQUENCY
1. Press and release
SET
button until the
CHANNEL-FREQUENCY page appears.
2.
Press ▲(
UP)
or ▼(
DOWN)
button to select
a new channel. As the channel changes, the
frequency changes accordingly, too.
►
►
3. After a channel is chosen, wait 5 seconds to store the setting.
CHANNEL SYNCHRONIZING of the receiver and transmitter
Align infrared areas of the receiver and transmitter within 30cm.
A. Changing
the receiver’s channel
B. Changing
the transmitter’s channel
1.
Press the synchronizing button of the
transmitter.
1.
Press the SYNC button of the receiver.
▼
▼
2.
The transmitter's LED will grow to denote
synchronizing signal transmitted.
2.
IRDA DATA SEND
will appear on the
receiver’s display
▼
▼
3.
COPIED BY IRDA
will appear on the
receiver's LCD, which means the receiver
has been successfully synchronized.
3.
Then
IRDA TX FINISH
will appear to
denote data transferred.
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
:
:
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
:
:
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
< 30cm