9
BELT-PACK TRANSMITTER
SM-7100
■
Parts and functions
1. Antenna
2. Battery weak/audio mute indicator
3. Audio mute switch
4. (Lavalier microphone) Mini XLR connector
5. LCD
6. Charging port
7. Cover release button
8. Power switch
9. Gain control (GT, high impedance)
10. Gain control (MT, low impedance)
11. Setting button
12. Up button
13. Down button
14. Battery compartment
15. Charging contacts
■
Battery installation & indicator
This belt-pack requires 2 x AA batteries to operate.
To install, open the battery cover using the cover release buttons and insert the batteries into
the battery compartment.
Note
: Batteries contain a corrosive acid that may leak and damage the belt-pack when stored
for a long period. Batteries should be removed from the belt-pack before storing without use for
more than 4 weeks.
When the transmitter is switched ON, the battery power LED
②
will blink once to indicate the
batteries installed are in good condition.
If the LED remains illuminated the batteries have
expired and require replacement.
■
Channel setting
Use
UP
or
DOWN
button to go to the
CHANNEL/ FREQUENCY
page.
The cursor will flash to allow changes to be made. Pressing
UP
or
DOWN
button will increase
or decrease the channel number. The corresponding frequency will change accordingly. When
a desired channel is selected, it will be automatically saved and stored in the memory.
1
2 3
4
6
5
7
8
12
9
11
10
13
14
15
15
