2
Instructions
Standard Configuration
1.
Gooseneck micr base
2.
Operation manual
3.
Switching adaptor
LCD menu settings
Changing CHANNEL / FREQUENCY
Use
UP
or
DOWN
button to go to the CHANNEL / FREQUENCY page.
The cursor will flash to allow changes to be made. Pressing
UP
or
DOWN
button will increase or
decrease the channel number. The corresponding frequency will change accordingly. When a
desired channel (frequency) is selected, press
SET
for about 2 seconds to save the setting.
IMPORTANT
: When changing transmitter frequencies, user should take care not to cause
interference to other channels / users.
Changing Battery selection
Use
UP
or
DOWN
button to go to the Battery selection page.
Press
SET
for about 2 seconds to show the cursor. Press
UP
or
DOWN
button to move the
cursor to either NiMH (rechargeable battery) or AKLN (Alkaline battery) position.
When the desired option has been selected, press
SET
for about 2 seconds to save the setting.
IMPORTANT
: Do not connect the adaptor when AKLN batteries are being used. Wrong
selection of battery will cause battery sensing electronics to display wrong information and
mislead charging status.
