6
Instructions
Audio output connection
Balanced output
: XLR connector provides balanced audio output signal from this jack to the
mixer/amplifier.
Use an audio output cable with “XLR” or “Cannon” connector, connect one
end to the balanced output jack of the receiver, and
the other end to the “
MIC IN
” jack of the
mixer/ amplifier.
Unbalanced output
: ¼” PHONE PLUG connector provides unbalanced audio output signal
from this jack to the mixer/amplifier.
Use
an audio output cable with ¼” PHONE PLUG
connectors. Connect one end from the unbalanced output jack of the receiver, and the other
end to the “
LINE IN
” jack of the mixer/ amplifier.
MIC IN
LINE IN
Receiver installation
For best operation, the receiver should be at least 1m above the
ground and 1m away from a wall or metal surface to minimize
reflections. The transmitter should also be at least 1m away from a wall
or metal surface to minimize reflections. The transmitter should also be
at least 1m away from the receiver. Keep antennas away from noise
source such as motors, automobiles, neon light as well as large metal
objects.
A N T. B
A N T. A
D C I N
1 2 ~ 1 5 V
L I N E O U T
M I C O U T
1
.
G
2 .
3 .
A N T. B
A N T. A
D C I N
1 2 ~ 1 5 V
L I N E O U T
M I C O U T
1
.
G
2 .
3 .
Fig 1:
Rack mount of one receiver
Fig 2:
Rack mount of two receivers
1m
1m
1m
