-5-
Pairing DCT-511 and DCR-511
Even though the transmitter and receiver (in the same package) were
ready paired at the factory, it is highly recommended that before the tour
begins, the receivers should do a fresh pairing with the specific tour
leader’s transmitter.
1.
Turn off DCT-511 and
DCR-511
2.
Press DCT-
511’s power
button for 5 seconds
3.
The mute indicator
flashes green to imply
readiness to pair.
OFF
GREEN
flashes, lasting
14 seconds for pairing.
4.
Press DCR-
511’s power button for 5
seconds.
5.
DCR-511
’s signal led will glow.
GREEN
: pairing done
RED
: pairing failed.
Remarks
Before pairing, please make sure that the battery has enough power and
then turn off the devices. Pairing
isn’t workable if the power is weak with
indicator
glowing RED.
To synchronize mass receivers with the transmitter, just follow
STEP 4
on all receivers simultaneously.
Once the transmitter and receiver are paired, they will stay paired and no
pairing is needed for usages later on.
