2
Instructions
Channel synchronizing of the receiver and transmitter
1
Open the cover and then press and hold
the synchronizing button until
“
LINK
” on the
LCD flashes.
2
Press and hold the receiver’s
SYNC
button
until the frequency icon
appears. After
successful channel synchronizing, this icon
will disappear automatically.
Battery type setting
1
Press-release
MENU
button until the
CHANNEL-BATTERY TYPE page appears.
2
Press and hold
SET
button until
NIMH
or
AKLN
flashes to denote readiness for
setting.
3
Press-release
SET
or
MENU
button to
select either NiMH (rechargeable battery)
or AKLN (alkaline battery).
4
After a battery type is chosen, wait about 3
seconds to store the setting.
IMPORTANT:
NiMH battery must be selected when rechargeable battery is being used. Never select AKLN
(alkaline) when transmitter is intended for charging as alkaline battery isn’t rechargeable. Wrong battery
selection will result in battery sensing electronics to display wrong and misleading status information.
RF power setting
1
Press-release
MENU
button until the
CHANNEL-RF POWER page appears.
2
Press and hold
SET
button until the RF
power figure flashes to denote readiness
for setting.
3
Press-release
SET
(UP) or
MENU
(DOWN)
button to choose an output level from 0db
to 20db.
4
After an output level is chosen, wait about 3
seconds to store the setting.
C H : 0 0 0
L I N K
FREQ
SYNC
CH
FREQ
CH.
RF
AF
MHz
079
2480
C H : 0 7 6
A K L N
C H : 0 7 6
A K L N
C H : 0 7 6
N I M H
C H : 0 7 6
R F 0 8
C H : 0 7 6
R F 0 8
C H : 0 7 6
R F 1 2
