2
3. Press “
” to confirm, screen displays 1, “1” is flashing, and press “ ” “ ” “
” key to
choose the number you want to save. (You can choose the number from 0-9, A-E)
4. Press any key from the transmitter, you will hear a voice (success) the number has been
registered successfully and then the number will skip to the next one.
5. Press “
” it will exit to “E2”, press “
” again to exit setting state.
F2 Deletion Mode
E1 Delete Transmitters
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key to display F2, press “
” to display E1
3. Press “
” to confirm, screen displays 01, “1” is flashing, and press “ ” “ ” “
” key
to choose the number you want delete.
4. Press “
” key, you will hear a voice (success), this means number has been deleted
successfully.
5. Press “
” it will exit to “E1”, press “
” again to exit setting state
key can move digits.
and
can add or decrease number.
E2 Delete Counter Number
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key, screen displays F2, press “
” screen displays E1, press “ ” to show E2
3. Press “
” to confirm, screen displays 1, “1” is flashing, and press “ ” “ ” key to
choose the number you want delete. (You can choose the number from 0-9, A-E)
4. Press “
” key, you will hear a voice (success), this means number has been deleted
successfully.
5. Press “
” it will exit to “E2”, press “
” again to exit setting state
F3 Display Setting
E1 Display Mode
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key two times to display F3, press “
” screen displays E1
3. Press “
” to display 1 or 2, and then choose the one you need
“1” means Live mode- -means when No.1 No.2 No.3 call in turn, the screen shows 03 02
01. Newest call number shows on the top of screen.
“2” means the Queue mode- -means when No.1 No.2 No.3 call in turn, the screen shows
01 02
4. Press “
” it will exit to “E1”,
5. Press “
” again to exit setting state
E2 Storage Number
1. Press “
” key 2 seconds, screen displays F1
2. Press “
” key two times, screen displays F3, press “
” screen displays E1, press “ ”
to display E2
3. Press “
” to confirm, press “ ”” ” to choose the number from 01-99
4. Press “
” it will exit to “E2”,
5. Press “
” again to exit setting state
F4 Logout Setting (Remove Timing Setting)
1. Press “
” key 2 seconds, the screen displays F1
2. Press “
” key three times, screen displays F4, press “
” screen displays 00(or other
numbers).
3. Press “
”” ” to choose the number from 00-99
“00” means the number will be displayed on the screen until it is canceled.
“01-99” means the time the last call will be displayed. If you choose 50, it means last
number will be displayed for 50 seconds on the screen. When time is up, this number will be
deleted automatically
4. Press “
” it will exit to “F4”,
5. Press “
” again to exit setting state
F5 Cycle Mode
1. Press “
” key 2 seconds, the screen displays F1
2. Press “
” key four times, screen displays F5, press “
” screen displays 00(or other
numbers)
3. Press “
”” ” to choose the number from 00-99
“00” means the number will be steady
“01-99”. For example, if you choose 10 seconds, it means each 10 seconds number will
cycle one time.
4. Press “
” it will exit to “F5”, then it is s successful.
5. Press “
” again to exit setting state
