Chevrolet TRAX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
11354406) - 2018 - crc - 5/17/17
Vehicle Care
253
Driver Side Shown, Passenger
Side Similar
1. Sidemarker lamp
2. Stoplamp
3. Back-Up Lamp
4. Turn Signal Lamp
Passenger Side Shown, Driver
Side Similar
1. Remove and retain both
screws attaching the taillamp
assembly to the vehicle body.
2. Pull the taillamp assembly
straight back to detach it from
the vehicle body. Take care
that the cable duct remains in
place.
3. Remove the bulb socket from
the taillamp assembly.
4. Remove the old bulb from the
bulb socket by pulling it
straight out.
5. Insert a new bulb into the bulb
socket.
6. Install the bulb socket into the
taillamp asembly.
7. Install the taillamp assembly to
the vehicle body with the two
screws.