Chevrolet T-Series, Руководство пользователя

Страница: 66 / 326

Clutch Brake (Vehicles with
Non-Synchronized Transmission)
A clutch brake is used to stop transmission input
shaft rotation so that FIRST (1) or REVERSE (R)
gear selection can be initiated when the vehicle is
at a standstill and the engine is idling.
Press the clutch pedal all the way down to the
floorboard to apply the clutch brake.
When using the clutch brake, disengage the clutch
pedal and shift the transmission into either the
initial starting gear or REVERSE (R). If the
tooth-butting occurs between the clutching teeth,
re-engage the clutch while applying light pressure
to the shift lever. This will provide for a smooth
shift into either FIRST (1) or REVERSE (R) gear.
Notice: Using the clutch brake for shifting
into any gear other than FIRST (1) or
REVERSE (R) may cause premature wear of
the clutch brake and make gear shift effort
more difficult. Do not use the clutch brake for
shifting after engaging FIRST (1) or
REVERSE (R).
Power Take-Off (PTO)
Your vehicle may be
equipped with power
take-off (PTO). The PTO
switch is located on
the instrument panel.
An indicator in the switch comes on to show PTO
is active.
A PTO is a gearbox or mechanical device used to
transmit mechanical power from the powertrain,
through gears or a transmission, to another
mechanical or hydraulic device. Before using a
PTO, refer to the manufacturer’s or installer’s
instructions.
66