Chevrolet Low Cab Forward Owner Manual (GMNA-Localizing-U.S.-
10399647) - 2016 - crc - 5/25/16
Infotainment System
105
Setting the Hour
1. Press the "FUNC" button to
display "CLK" and make the
clock display (hours) blink.
2. Press the "TUNE/TRACK"
button ("
y z
") while the
clock display (hours) is blinking
to adjust the time (hours).
y
: Time (hours) will increase
every time the button is
pressed.
z
: Time (hours) will decrease
every time the button is
pressed.
Setting the Minutes
1. Press the "FUNC" button to
display "CLK" and make the
clock display (minutes) blink.
2. Press the "TUNE/TRACK"
button ("
y z
") while the
clock display (minutes) is
blinking to adjust the time
(minutes).
y
: Time (minutes) will
increase every time the button
is pressed.
z
: Time (minutes) will
decrease every time the button
is pressed.
Tuner Mode Operations
Tuning
1. Press the "MODE" button when
the power is on to select either
AM radio or FM radio.
It is switched to AM radio when
"AM" is displayed, and FM
radio when "FM" is displayed.
2. Press the "TUNE" button ("
y
z
") for less than 2 seconds to
select a radio station manually.
The display should be checked
in order to adjust the frequency
because AM radio frequency
will range from 10 kHz or FM
radio frequency will range from
0.2 MHz.
Press the "TUNE" button ("
y
z
") for 2 seconds or longer to
select a radio station
automatically. The automatic
tuning will stop after detecting
a receivable station. Press the
"TUNE" button ("
y z
") again
to cancel this function.
When the displayed frequency
reaches the highest frequency, it will
return to the lowest frequency.
When the lowest frequency has
been reached, it will return to the
highest frequency.
Program your preferred radio
stations to the preset channels in
advance to conveniently use while
driving.
Reception frequency :
AM 530 - 1710 kHz (10 kHz step)
FM 87.7 - 107.9 MHz (0.2
MHz step)
Calling Out Preset Channels
A maximum of 6 stations can be
programmed and called out in the
"Preset" channels for each of the
FM radio and AM radio.
1. Press the "CH" button for less
than 2 seconds.