Chevrolet Kodiak 2008, Руководство пользователя

Страница: 248 / 384

How to Add Fluid
To add transmission fluid, do the following:
1. Remove the filler plug.
2. Add fluid at the filler plug hole. Add only enough
fluid to bring the fluid level up to the bottom of
the fill opening. Refer to the Maintenance
Schedule to determine the proper fluid to use.
See Part C: Recommended Fluids and Lubricants
on page 6-31.
3. Reinstall the filler plug. Be sure the plug is fully
seated.
Engine Coolant (Caterpillar
®
Diesel
Engines)
If your vehicle has a Caterpillar
®
diesel engine, see the
Caterpillar
®
Diesel Engine Operation & Maintenance
Manual provided with your vehicle to find out what to
add, as well as when and how to service your cooling
system.
Engine Coolant (Gas and
DURAMAX
®
/Isuzu 7.8L L6 Engines)
The cooling system in your vehicle is filled with
DEX-COOL
®
engine coolant. This coolant is designed
to remain in your vehicle for five years or 150,000 miles
(240 000 km), whichever occurs first, if you add only
DEX-COOL
®
extended life coolant.
The following explains your cooling system and how to
add coolant when it is low. If you have a problem with
engine overheating, see Engine Overheating on
page 5-48.
A 50/50 mixture of clean, drinkable water and
DEX-COOL
®
coolant will:
•
Give freezing protection down to
−
34°F (
−
37°C).
•
Give boiling protection up to 265°F (129°C).
•
Protect against rust and corrosion.
•
Help keep the proper engine temperature.
•
Let the warning lights and gages work as they
should.
Notice: Using coolant other than DEX-COOL
®
may
cause premature engine, heater core or radiator
corrosion. In addition, the engine coolant may
require changing sooner, at 30,000 miles (50 000 km)
or 24 months, whichever occurs first. Any repairs
would not be covered by your warranty. Always use
DEX-COOL
®
(silicate-free) coolant in your vehicle.
5-44