Chevrolet Impala Police 2012, Руководство пользователя

Страница: 45 / 62

Black plate (13,1)
Chevrolet Impala Police Package - 2012
Special Equipment Options 15-13
The headlamps flashing module
is located at the inboard end of
the passenger side headlamps
assembly. The headlamps flashing
module is activated by the
application of 12 volts to a red/white
wire coiled in the passenger side
footwell. When activated, the driver
and passenger side high-beam
headlamps will flash alternately at
2.4 flashes per second.
During daylight conditions, the
Daytime Running Lamps (DRL)
are automatically turned off
whenever the headlamps
flasher module is activated.
During nighttime conditions, the
low-beam headlamps turn on
automatically while the high-beam
headlamps flash. Turning on the
high-beam headlamps manually
with the turn signal/multifunction
lever will override the flashing
module and the high-beam
headlamps will operate
continuously.
A fuse labeled HDLP MDL protects
the flasher module circuit. This fuse
is located in the underhood fuse
block in the engine compartment on
the passenger side of the vehicle.
See
“ Fuses and Circuit Breakers ”
in the Vehicle Care section of your
Impala owner manual for more
information.
When the headlamps flashing
module is turned on, the module
sends a signal to the Body Control
Module (BCM). The BCM alternately
flashes the stop lamps and backup
lamps. Depressing the brake pedal
will override the stop lamp flashing
and placing the transaxle in reverse
will override the backup lamp
flashing.
When it is dark outside, the
taillamps will turn on automatically.
The Center High-Mounted Stoplamp
(CHMSL) will not flash and will
operate only when the regular brake
pedal is pressed.