13
Setting Cruise Control
1. Press the
On/Off
button. The
Cruise Control symbol will illuminate in white on
the instrument cluster.
2. When traveling at the desired speed, press the
SET–
button to set the speed. The
symbol will illuminate in green on the instrument cluster.
Adjusting Cruise Control
RES+ Resume/Accelerate
Press to resume a set speed.
When the system is active, press once to
increase speed 1 mph; press and hold to
continue increasing speed.
SET– Set/Coast
When the system is active, press once to
decrease speed 1 mph; press and hold to
continue decreasing the speed.
Cancel
Press to cancel the cruise control without erasing the set speed from memory.
Pressing the brake pedal also will cancel the cruise control.
The cruise control set speed is erased when cruise control or the vehicle ignition is
turned off.
See Driving and Operating in your Owner Manual.
Cruise Control
Automatic Transmission
Driver Shift Control
Driver Shift Control allows the driver to select
the range of gears desired for the current driving
conditions.
1. Move the shift lever to the L (Manual) position.
2. Press the
+ (plus)
or
– (minus)
button on the
shift lever to select a lower or higher gear. An
L and the current gear will be displayed on the
Driver Information Center.
The transmission will be limited to the gear selected and lower gears. If vehicle speed is
too high or too low for the requested gear, the shift will not occur.
Tow/Haul Mode
The Tow/Haul Mode adjusts the transmission shifts to reduce shift cycling, such as when
towing or hauling heavy loads or driving on steep grades.
Press the
Tow/Haul Mode
button on the center of the instrument panel to turn
the system on or off.
See Driving and Operating in your Owner Manual.