Black plate (2,1)
Chevrolet Camaro Owner Manual (GMNA-Localizing-Europe-8087691) -
2015 - CRC - 7/8/14
6-2
Lighting
;
(Position Lamps):
Turns on
the position lamps together with the
taillamps, number plate lamps, and
instrument panel lights.
A warning chime sounds if the driver
door is opened when the ignition
switch is off and the lamps are on.
5
(Headlamps):
Turns on the
headlamps together with the
position lamps, taillamps, number
plate lamps, and instrument panel
lights.
A warning chime sounds if the driver
door is opened when the ignition
switch is off and the headlamps
are on.
#
(Front Fog Lamps):
Press to
turn the front fog lamps on or off.
s
(Rear Fog Lamps):
Press to
turn the rear fog lamps on or off.
See
or
Headlamp Main/
Dipped-Beam Changer
Push the indicator lever away from
you and release to turn the main
beams on. To return to dipped
beams, push the stalk again or pull
it toward you and release.
This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.
Flash-to-Pass
The flash-to-pass feature works with
the low beams or Daytime Running
Lamps (DRL) on or off.
To flash the main beams, pull the
indicator lever all the way toward
you, then release it.
Daytime Running
Lamps (DRL)
Daytime Running Lamps (DRL) can
make it easier for others to see the
front of your vehicle during the day.
A light sensor on top of the
instrument panel makes the DRL
work, so be sure it is not covered.
The DRL lamps will come on when
the following conditions are met:
.
The ignition is in the ON/RUN
position.
.
The exterior lamp control is in
AUTO, or has been briefly
turned to OFF to turn the
automatic light control on again.
.
The engine is running.
When the DRL are on, the
headlamps, tail lamps, side
markers, instrument panel, and
other lamps will not be on.
The headlamps automatically
change from DRL to the regular
headlamps depending on the
