Black plate (25,1)
Chevrolet Spark Owner Manual (GMNA-Localizing-U.S./Canada-5853490) -
2014 - 1st - 4/25/13
Vehicle Care
10-25
Bulb Replacement
For the proper type of replacement
bulbs, see
Replacement Bulbs on
page 10-27
.
For any bulb
‐
changing procedure
not listed in this section, contact
your dealer.
Halogen Bulbs
{
Warning
Halogen bulbs have pressurized
gas inside and can burst if you
drop or scratch the bulb. You or
others could be injured. Be sure
to read and follow the instructions
on the bulb package.
Headlamps, Front Turn
Signal and Parking
Lamps
High/Low-Beam Headlamp
1. Connector Retaining Tab
2. Connector Release
3. Headlamp Bulb
To replace a headlamp bulb:
1. Open the hood. See
Hood on
page 10-4
.
2. Remove the connector
retaining tab (1).
3. Disconnect the wiring harness
connector from the bulb (3) by
pressing the connector
release (2) and pulling
straight back.
4. Remove the bulb (3) from the
headlamp assembly by turning
counterclockwise and pulling
straight back.
5. Install the new bulb in the
headlamp assembly by turning
clockwise.
6. Install the wiring harness
connector to the bulb. Be sure
the connector release (2) locks
into place.
7. Install the connector
retaining tab (1).
Front Turn Signal/Parking
Lamps
To replace a front turn signal bulb:
1. Open the hood. See
Hood on
page 10-4
.