Chevrolet 2010 Silverado, Руководство пользователя

Страница: 491 / 626

6. Check that the jumper cables do not have loose or
missing insulation. If they do, you could get a
shock. The vehicles could be damaged too.
Before you connect the cables, here are some
basic things you should know. Positive (+) will go to
positive (+) or to a remote positive (+) terminal if
the vehicle has one. Negative (
− ) will go to a
heavy, unpainted metal engine part or to a remote
negative (
− ) terminal if the vehicle has one.
Do not connect positive (+) to negative ( − ) or you
will get a short that would damage the battery and
maybe other parts too. And do not connect the
negative (
− ) cable to the negative ( − ) terminal on
the dead battery because this can cause sparks.
5.3L engine (4.3L, 4.8L,
6.0L and 6.2L similar)
7. Connect the red
positive (+) cable to the
positive (+) terminal of
the vehicle with the
dead battery.
8. Do not let the other end touch metal. Connect it to
the positive (+) terminal of the good battery. Use a
remote positive (+) terminal if the vehicle has one.
9. Now connect the black negative ( − ) cable to the
negative ( − ) terminal of the good battery. Use a
remote negative ( − ) terminal if the vehicle has one.
Do not let the other end touch anything until the
next step.
10. Connect the other end of the negative ( − ) cable to
a heavy, unpainted metal engine part or to the
remote negative (
− ) terminal, on the vehicle with
the dead battery.
11. Start the vehicle with the good battery and run the
engine for a while.
12. Try to start the vehicle that had the dead battery.
If it will not start after a few tries, it probably needs
service.
6-47