Chevrolet 2009 Colorado, Руководство пользователя

Страница: 177 / 418

Finding a Station
AM FM (AM-FM Radio): Press to switch between FM1,
FM2, or AM. The selection displays.
BAND: Press to switch between FM1, FM2, AM, or
XM1 or XM2 (if equipped). The selection displays.
q r
TUNE: Turn to select radio stations.
q
SEEK
r
: Press to go to the previous or to the next
station and stay there.
To scan stations, press and hold either arrow for
two seconds until a beep sounds. The radio goes to a
station, plays for a few seconds, then goes to the
next station. Press either arrow again to stop scanning.
To scan preset stations, press and hold either arrow
for more than four seconds until two beeps sound.
The radio goes to the first preset station stored on the
pushbuttons, plays for a few seconds, then goes to
the next preset station. Press either arrow again to stop
scanning presets.
q
SCAN
r
: Press and hold for more than
two seconds. SCAN or SCN displays and the radio
produces one beep. The radio goes to a station, plays
for a few seconds, then goes to the next station.
Press either SCAN arrow again, to stop scanning
presets.
To scan preset stations, press and hold either SCAN
arrow for more than four seconds. PSCN or PSC
displays and the radio produces one beep or depending
on the radio, two beeps. The radio goes to a preset
station, plays for a few seconds, then goes to the next
preset station. Press either SCAN arrow again, to
stop scanning presets.
The radio only scans stations with a strong signal that
are in the selected band.
3-47