9
RPT (Repeat):
Press this button to hear
a track again. Press the button again to
turn off repeat play.
(Song List):
Press and hold this
button to save and play up to 20 track
selections in the song list.
MUTE
(if equipped): Press this button
to silence the audio system. Press this
button again to turn the sound on.
(Load)
(if equipped): Press this
button to load CDs into the six-disc CD
player.
(Eject):
Press this button to eject a
CD. (Eject operates with the ignition or
radio off.)
:
Press the left arrow to go to the
start of the current track or the right
arrow to go to the next track. Press and
hold either arrow button to continue
moving backward or forward through
the CD.
To scan a CD, press and hold either
arrow button for more than two seconds
until SCAN is displayed. The first 10
seconds of each track will be played.
Press and hold either arrow button for
more than four seconds until CD SCAN
is displayed to play the first 10 seconds
of the first track of each loaded CD.
Press either arrow button to stop
scanning.
BAND:
Press this button while a CD is
playing to listen to the radio instead.
AUTO EQ (Automatic Equalization):
Press this button to select the desired
equalization setting while playing a CD.
The setting will be automatically recalled
whenever a CD is played.
See Section 3 of your Owner Manual.
Multiple-Disc CD Changer
(if equipped)
Loading CDs
1. Turn on the ignition.
2. Press the
button once to load
one disc. Press and hold the
button to load multiple discs.
3. The unit will beep and INSERT CD #
will be displayed.
4. Insert a CD partway into the slot,
label side up; the player will pull in
the CD.
5. LOADING CD # will be displayed.
6. Follow the display prompts to load
additional CDs.
The last CD loaded will automatically
begin to play. Press the radio preset
button (1–6) to play a specific CD.
To eject one disc, press the
button
once. To eject multiple discs, press and
hold the
button.
See Section 3 of your Owner Manual.
Note:
CDs with any affixed labels may
jam in the CD player. Label a CD using
a permanent marker. If more than one
CD is inserted into the slot at one time,
or if scratched or damaged CDs are
played, the CD player could be dam-
aged. When using the CD player, use
only CDs in good condition without
labels; load one CD at a time; and keep
the CD player and the loading slot free
of foreign materials, liquids or debris.
RELAY 2007 A 7/19/06 3:43 PM Page 9