Chevrolet 2007 Express 2007 Express, Руководство пользователя

Страница: 330 / 452

7. Do not let the other end touch metal. Connect
it to the positive (+) terminal of the good
battery. Use a remote positive (+) terminal if
the vehicle has one.
8. Now connect the black negative (
−
) cable to
the negative (
−
) terminal of the good battery.
Use a remote negative (
−
) terminal if the
vehicle has one.
Do not let the other end touch anything until
the next step. The other end of the negative (
−
)
cable does not go to the dead battery.
It goes to a heavy, unpainted metal engine
part or to a remote negative (
−
) terminal on
the vehicle with the dead battery.
9. Connect the other end of the negative (
−
)
cable to the negative (
−
) terminal location
on the vehicle with the dead battery.
Your vehicle has a remote negative (
−
)
terminal for this purpose. It is marked GND.
10. Now start the vehicle with the good battery
and run the engine for a while.
11. Try to start the vehicle that had the dead
battery. If it will not start after a few tries, it
probably needs service.
Notice: If the jumper cables are connected or
removed in the wrong order, electrical shorting
may occur and damage the vehicle. The repairs
would not be covered by your warranty. Always
connect and remove the jumper cables in the
correct order, making sure that the cables do
not touch each other or other metal.
330