Chevrolet 2005 T-Series, Руководство пользователя

Страница: 72 / 288

Turn and Lane-Change Signals
The turn signals are controlled by the multifunction
lever.
To signal a turn, move the lever all the way up for right
or down for left and release it. When the turn is
finished, the lever will return automatically.
To signal a lane change, raise or lower the lever until
the arrow on the instrument panel starts to flash.
Hold the lever in this position until the lane change has
been completed.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
If you signal a turn or a lane change and the arrows on
the instrument panel turn on but do not flash, check
the turn signal flasher and circuit breaker.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you signal
a turn, check for burned-out bulbs and a blown fuse.
See Fuses and Circuit Breakers on page 5-78.
Headlamp High/Low-Beam Changer
3 (Headlamp High/Low Beam Changer): To
change the headlamps from low to high beam, push the
multifunction lever toward the instrument panel. To
return to low-beam headlamps, pull the multifunction
lever toward you. Then release it.
While the high beams are
on, this indicator light on
the instrument panel
cluster will also be on.
Flash-to-Pass
This feature lets you use the high-beam headlamps to
signal a driver in front of you that you want to pass.
It works even if the headlamps are in the automatic
position.
To use this feature, pull the multifunction lever toward
you, then release it.
If the headlamps are in the automatic position or on low
beam, the high-beam headlamps will turn on. They’ll stay
on as long as you hold the lever toward you. The
high-beam indicator on the instrument panel cluster will
come on. Release the lever to return to normal operation.
3-8