Chevrolet 2005 Impala Скачать руководство пользователя страница 197 | Manualshive

Страница: 197 / 392

Chevrolet 2005 Impala Скачать руководство пользователя страница 197

Playing a CD

Insert a CD partway into the slot, label side up. The
player will pull it in and the CD should begin playing. If
you want to insert a CD with the ignition or the radio
off, first press the EJT button or the DISPL knob.

If the ignition or radio is turned off with the CD in the
player, it will stay in the player. When the ignition
or radio is turned on, the CD will start playing where it
stopped, if it was the last selected audio source.

When a CD is inserted, the CD symbol will appear on
the display. As each new track starts to play, the
track number will appear on the display.

The CD player can play the smaller 3 inch (8 cm) single
CDs with an adapter ring. Full-size CDs and the
smaller CDs are loaded in the same manner.

If playing a CD-R the sound quality may be reduced
due to CD-R quality, the method of recording, the quality
of the music that has been recorded, and the way the
CD-R has been handled. There may be an increase
in skipping, difficulty in finding tracks, and/or difficulty in
loading and ejecting. If these problems occur try a
known good CD.

Do not add paper labels to CDs, they could get caught
in the CD player.

If an error appears on the display, see “CD Messages”
later in this section.

1 PREV (Previous): Press this pushbutton to go to the
start of the current track if more than eight seconds
have played. TRACK and the track number will appear
on the display. If this pushbutton is held or pressed
more than once, the player will continue moving
backward through the CD.

2 NEXT: Press this pushbutton to go to the next track.
TRACK and the track number will appear on the display.
If his pushbutton is held or pressed more than once, the
player will continue moving forward through the CD.

3 REV (Reverse): Press and hold this pushbutton to
reverse quickly within a track. Press and hold this
pushbutton for less than two seconds to reverse at
six times the normal playing speed. Press and hold it for
more than two seconds to reverse at 17 times the normal
playing speed. ET and the elapsed time of the track will
appear on the display. Release this pushbutton to play
the passage.

4 FWD (Forward): Press and hold this pushbutton to
advance quickly within a track. Press and hold this
pushbutton for less than two seconds to advance at
six times the normal playing speed. Press and hold this
pushbutton for more than two seconds to advance at
17 times the normal playing speed. ET and the elapsed
time of the track will appear on the display. Release
this pushbutton to play the passage.

3-85

«
...
195
196
197
198
199
...
»

Содержание 2005 Impala









































































































































































































































































































































































































Отзывы:

Нет отзывов