Chevrolet 2004 Epica, Руководство пользователя, Страница: 213 / 338

Automatic Transaxle Fluid
It is not necessary to check the transaxle fluid level.
If a leak occurs, take the vehicle to the dealership
service department and have it repaired as soon as
possible. You may also have your fluid level checked
by your dealer or service center when you have your
oil changed.
Have your dealer or service center change both the fluid
and filter every 50,000 miles (83 000 km) if the vehicle
is mainly driven under one or more of these conditions:
•
In heavy city traffic where the outside temperature
regularly reaches 90°F (32°C) or higher.
•
In hilly or mountainous terrain.
•
Uses such as found in taxi, police or delivery
service.
If you do not use your vehicle under any of these
conditions, the fluid and filter do not require changing.
Notice: Use of automatic transaxle fluid labeled
other than ESSO LT71141 or TOTAL ATF H50235
may damage your vehicle, and the damages may
not be covered by your warranty. Always use
ESSO LT71141 or TOTAL ATF H50235 labeled
automatic transaxle fluid.
Engine Coolant
The following explains your cooling system and how
to add coolant when it is low. If you have a problem with
engine overheating, see Engine Overheating on
page 5-22.
A 50/50 mixture of clean, drinkable water and proper
coolant will:
•
Give freezing protection down to
−
22°F (
−
30°C).
•
Give boiling protection up to 268°F (131°C).
•
Protect against rust and corrosion.
•
Help keep the proper engine temperature.
•
Let the warning lights and gages work as they
should.
What to Use
Use a 50/50 mixture of clean, drinkable water and coolant
that meets GM specification 1825M, which will not
damage aluminum parts. You can also use a recycled
coolant confirming to GM specification 1825M with a
complete coolant flush and refill. If you use this coolant
mixture, you do not need to add anything else.
5-19