Chevrolet 2000 Lumina, Руководство пользователя, Страница: 75 / 322

2-8
To replace the battery:
1. Insert a flat object like a dime into the slot on the
back of the transmitter. Gently pry apart the front
and back.
2. Remove the old battery and replace it with the new
one, making sure the positive (+) side of the battery
is facing down. Do not use a metal object to remove
the old battery. (Use type CR2032 or an equivalent.)
3. Snap the top and bottom together, making sure the
halves are together tightly so water won’t get in.
4. Test the operation of the transmitter with
your vehicle. If the transmitter does not work,
try resynchronizing the transmitter.
(See “Resynchronization” following.)
Resynchronization
Resynchronization may be necessary due to the security
method used by this remote keyless entry system. The
transmitter does not send the same signal twice to the
receiver. The receiver will not respond to a signal it has
previously been sent. This prevents someone from
recording and playing back the signal from the transmitter.
To resynchronize the transmitter with the receiver, do
the following:
1. Stand close to your vehicle.
2. Simultaneously press and hold the LOCK and
UNLOCK buttons on the transmitter for about seven
seconds. The door locks should cycle (lock and
unlock) to confirm resynchronization.
If the locks do not cycle, see your dealer for service.