Chevin S240LP, Руководство пользователя

Страница: 6 / 7

Technical Specifications S480LP
Power output (1kHz, 1% THD) 400W
Input sensitivity 1V
Input impedance 20kOhm balanced
THD (1kHz, -3dB) <0,07%
Frequency resonse (-3dB) 20Hz – 20kHz
Signal / noise ratio
20Hz – 20kHz below rated power
“A” weighted
> 100dB
> 104dB
Output 100V / 70V / 50V
automatic limiter Protection
short circuit protection
thermal protection
protection against DC
overload protection
load-mismatch protection
Cooling convection, supported by fan
Connectors
Input
Output
Balanced male XLR + female XLR
terminal block
Controls Power switch, gain control
Indicators Green LED – POWER + SIGNAL
Red LED – PEAK
Power requirements AC 220-240V / 50-60Hz
Power consumption
Dimensions 483 x 88 x 297 mm (2U)
Weight
12 kg
This manual is intended for informational purposes only. All details included herein are subject to change without notice.
Chevin Research shall not be held responible for any damages, direct or indirect, arising from or relating to the use of this
manual.
© Chevin Research 2008. All rights reserved.