5
User Guide
Gateway Installation
Figure 1
GATEWAY MOUNTING
1. Mount the Chesterton Connect Gateway using the magnetic base, screws, or supplied cable tie. Mount securely in
upright position ensuring the power connector is facing down. For proper performance the mounting area must be free
of metal obstructions within 4"/10cms above, below, or beside the device. For best performance the device should be
mounted forward facing, upright, and in line of sight, with minimal obstructions, to the desired sensors.
STATUS
LIGHT PATTERN
DESCRIPTION
Startup/Activation
l
l
l
LEDs turn on
Power on/off
sequence
l
l
l
Constant blink Ready for setup
Normal Operation
l
Solid
Gateway connected
to mobile app
l
1 Blink
Sensor data received
l
1 Blink
Data sent to
the cloud
Error Code
l
Constant blink
Searching for
networks
l
1 Blink
Unable to
transmit data
Note: Place the Chesterton Connect Gateway in view of desired sensors with minimal obstruction for best performance.
*Note: The power supply is not outdoors rated. Users must make adequate arrangements if ingress protection is required.
2. Connect the AC power supply* into a standard 120V or 240V outlet. Plug the M12 connector into the Chesterton
Connect Gateway.
Figure 2
Partial obstruction
Fresnel radius
Line of sight