FEATURES
1.
Specially designed horizontal bandsaw.
2.
Offers three speeds for cutting metal.
3.
Shuts off automatically when material is cut.
4.
Scale for the mitring vice.
5.
Low noise whilst in operation.
6.
Casters (optional) for quick and easy moving.
DELIVERY & INSTALLATION
UNPACKING
1.
Transport to the desired location before unpacking, use lifting a lifting jack (Fig. B).
2.
Transport after unpacking, please use a heavyduty fibre belt in order to lift the machine.
FIG. B
TRANSPORT RECOMMENDATIONS
1.
Tighten all locks before operating.
2.
Always keep a proper footing & balance while moving the bandsaw.
3.
Disconnect the power supply, and make sure the machine is properly grounded.
4.
Check the blade making sure that it is running in a counterclockwise direction
5.
Keep the bandsaw out of direct sunlight, dust, wet or water.
INSTALLATION
1.
The saw may be mounted on a work bench or stand using six bolts.
2.
The rear end of the base must be mounted on the rear of the stand or bench to permit the
vertical operation for this bandsaw.
Chester UK HV128 Bandsaw
6
