2
- HCL
1.
Bioloog Ian
2.
Kerel met duikbril
Installation instruction Trisensor
v1.0 / 19-07-2021
www.chess.nl
Installation
The Trisensor is designed for flush mounting in a rectangular hole of 42 x 82 mm next to a Luminaire. A raised
edge at the front ensures correct positioning. The Trisensor is locked using a spring clip.
Do not touch the foil at the front of the Trisensor to prevent damage.
Mount the Trisensor (from the rear side) into the rectangular hole next to the luminaire.
Ensure that the front is flush mounted
Lock the Trisensor using a spring clip.
Connect the mains cable to the WAGO Winsta distribution connector of the luminaire.
Configuration
Use the iPad Mymesh commission app for configuration of the Trisensor.
Usage
The Trisensor will control the lighting and or HVAC in the configured zone/room.
Compliance
This product complies with the European directives and relevant standards for low voltage, EMC, RED, REACH
and RoHS. The Trisensor contains a 2.4 GHz radio. The applied frequency of the radio is within the band 2.401
– 2.483 GHz and the maximum transmit power is +4 dBm.
Hereby, Chess Wise declares that the radio equipment type Trisensor is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at chess.nl.
Repair
Do not open this product. In case of failure the Trisensor must be replaced.
Recycling
Do not dispose this product as household waste, but bring it to an appropriate collection point for recycling.
