![Chesney's Limestone Скачать руководство пользователя страница 19](http://html.mh-extra.com/html/chesneys/limestone/limestone_installation-manual_2596640019.webp)
17
INSTALLATION OF MARBLE AND LIMESTONE FIREPLACES
noTes reGardinG hearThs
Gas Decorative Hearth
Hearth to be bedded so there is a
change in height between
combustible finished flooring and
hearth, a height of 20mm would
satisfy or use of fixed fender.
Minimum depth 300mm (12") in
front and extend at least 150mm
(6") each side of the opening.
Gas Constructional Sub Hearth
At least 12mm thick and to extend
from the back of the structural
opening to project at least 300mm
(12") in front of the naked flame and
extend at least 150mm (6") each
side of the opening. The sub hearth
should be of a material that will
prevent the transmission of heat in
excess of 80 degrees centigrade to
its underside.
Solid Fuel Decorative Hearth
Minimum 300mm (12") in front
and extend at least 150mm (6")
each side of the opening. Set in
three equal pieces.
Solid Fuel Constructional
Sub Hearth
Usually of concrete at least
125mm (5") thick and to extend
from the back of the structural
opening to project at least
500mm (20") in front of the naked
flame and extend at least 150mm
(6") each side of the opening.
An air gap of at least 50mm is
required between base of
sub-hearth and combustible
material, and if combustible
material within the construction
of wall or support area this has
to be a minimum of 250mm from
top of constructional hearth.
Solid Fuel Back Hearth
This is the area immediately under
the fire and should be of firebrick
or heatproof screed. Never use
natural stone, marble or tiles as
they can shatter or explode.
If you require any further
technical assistance in relation
to installation, please do not
hesitate to contact us:
t: +44 (0) 20 7498 5555
WarninG
In order to prevent any part of the structure detaching from the wall:
It is essential that all parts of modular stone and marble fireplaces are
securely fixed to a solid wall by means of mechanical fixings.
The fireplace should never be glued to paintwork or plasterwork.
Note: We do not recommend this as a DIY installation and strongly
advise using the services of a qualified installer.
Содержание Limestone
