4
1 Technical data
1.1 Keyboard
1.2 Chip card reader
2 Certification
2.1 Declaration of CE Conformity
We, ZF Electronics GmbH, hereby declare that the key-
board
RS 6700USB
fulfills the following requirement:
• EMC Directive 2004/108/EC (directive on
electromagnetic compatibility), tested in accordance with
EN 55022 and EN 55024
Tested in accordance with ZF Electronics standard test
procedure.
2.2 Hinweis zum GS-Zeichen
Aufgrund der Position der Nulltaste des Nummernfelds ist
die Tastatur für Saldiertätigkeiten, die überwiegend blind
erfolgen, in Deutschland nicht anzuwenden. Eine Tastatur
mit nicht-deutscher Tastenknopfbelegung ist in Deutschland
aufgrund der Zeichenbelegung (DIN 2137 Teil 2) nicht für
den Dauereinsatz an Bildschirmarbeitsplätzen zu verwen-
den.
Bezeichnung/Designation/
Désignation
Wert/Value/
Valeur
Spannungsversorgung/Power supply/
Tension d'alimentation
+5 V 5 % SELV
Stromaufnahme/Current consumption/
Consommation de courant
max. 100 mA
Lagertemperatur/Storage temperature
range/Température de stockage
–20 °C – +60 °C
Betriebstemperatur/
Operating temperature range/
Température de fonctionnement
0 °C
−
+50 °C
Abmessungen/Dimensions/Dimensions 458 x 195 x
60 mm
Bezeichnung/Designation/
Désignation
Wert/Value/
Valeur
Kartenleseeinheit/Card reading unit/
Lecteur de carte
100 000 Steckzy-
klen/insertions/
cycles d'insertion
Protokolle/Protocols/Protocoles
T=0, T=1, S=8,
S=9, S=10
2.3 Federal Communications Commission (FCC)
Radio Frequency Interference Statement
Information to the user: This equipment has been tested and
found to comply with the limits for Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorientate or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
2.4 For UL
For use with Listed Personal Computers only!
2.5 VCCI Statement
Technical data and certification
