1224 East Warner Ave,
Santa Ana, Ca 92705
Tel: 1-714-545-5511
www.cherryaerospace.com
TS-H828-6MB, Rev: B, Date: 12/14/07, DCR# 07-1472
H828-6MB
Right Angle Pulling Head for BlindBolt
®
(MaxiBolt
®
) fasteners
TECHNICAL DATA SHEET
, Page 2 of 2
PREVENTATIVE MAINTENANCE
•
Inspect active area
regularly and keep it clean,
in good condition
•
Clean the Insert, Jaws and
Jaw Cavity inside the Collet
every 1,000 installations.
•
Lubricate outside
configuration of the jaws
with Lubriplate® or similar
light grease.
•
Use Loctite® 242
(removable) on threaded
components as shown.
•
At assembly, thread in the
Set Screws tightly (ITEM
16), then back them off ¼
of a turn.
PARTS LIST
LOCTITE® is a registered trademark of Henkel Corporation.
LUBRIPLATE® is a registered trademark of Fiske Brothers Refining Co.
18 828B6 COLLET
BOLT
1
17 828B3 LEVER
1
16 P-930 SET
SCREW
2
15 828B4 BELL
CRANK
1
14
828B15
LINK PLATES (SET OF 4)
3
13 828B14 LINK
PIN
6
12 828B5 DRAWBOLT
1
11
828B13
PIVOT PIN ASSEMBLY
2
10 642A64 JAM
NUT
1
9 828B7
ADAPTER
FITTING
1
8 828B2
FRAME
1
7 828B11
GUIDE
BUTTON
1
6 828A12
COMPRESSION
SPRING
1
5 828B21
JAW
FOLLOWER
1
4
744C76
JAWS (SET OF 3)
1
3 828C9
COLLET
1
2 828C8
SLEEVE
1
828-036
-6 NOSEPIECE “U” TYPE
1
1
828B23
-6 NOSEPIECE “S” TYPE
1
ITEM
NO.
PART NUMBER
DESCRIPTION
QTY.
PER
ASSY.
WARRANTY
Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and
inspected according to generally accepted practices of companies manufacturing industrial or aerospace
fasteners. In the event of any breach of the foregoing warranty, Buyer’s sole remedy shall be to return
defective goods (after receiving authorization from Seller) for replacement or refund of the purchase price,
at the Seller’s option. Seller agrees to any freight costs in connection with the return of any defective
goods, but any costs relating to removal of the defective or nonconforming goods or installation of
replacement goods shall be Buyer’s responsibility. SELLER’S WARRANTY DOES NOT APPLY WHEN ANY
PHYSICAL OR CHEMICAL CHANGE IN THE FORM OF THE PRODUCT IS MADE BY BUYER. THE
FOREGOING EXPRESS WARRANTY AND REMEDY ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES AND REMEDIES; ANY IMPLIED WARRANTY AS TO QUALITY, FITNESS FOR PURPOSE, OR
MERCHANTABILITY IS HEREBY SPECIFICALLY DISCLAIMED AND EXCLUDED BY SELLER. This warranty
is void if seller is not notified in writing of any rejection of the goods within ninety (90) days after receipt of
the goods by buyer.
Seller shall not be liable under any circumstances for incidental, special or consequential damages arising
in whole or in part from any breach by Seller, AND SUCH INCIDENTAL, SPECIAL, OR CONSEQUENTIAL
DAMAGES ARE HEREBY EXPRESSLY EXCLUDED.
Our policy is one of continuous development. Specifications shown in this document may be subject to
changes introduced after publication.
NOTE: The properties, strength, dimensions, installed characteristics and all other information in these
materials are for guidance only to aid in the correct selection
of the products described herein and is not intended or implied as part of the above warranty. All
applications should be evaluated for functional stability and available
samples of the described parts can be requested for installed tests, suitability and evaluations.
For more information please contact our Technical Services Department at tel. 714-850-6022
