background image

 

 

 

For more information please contact our Technical Services Department at Tel. 714-850-6022

1224 East Warner Ave, 

Santa Ana, CA 92705 

Tel: 1-714-545-5511 

Fax: 1-714-850-6093 

www.cherryaerospace.com   

© 2015 Cherry Aerospace  

Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and inspected according to generally accepted practices of 
companies manufacturing industrial or aerospace fasteners.  In the event of any breach of the foregoing warranty, Buyer’s sole remedy shall be to return defective 
goods (after receiving authorization from Seller) for replacement or refund of the purchase price, at the Seller’s option.  Seller agrees to any freight costs in 
connection with the return of any defective goods, but any costs relating to removal of the defective or nonconforming goods or installation of replacement goods 
shall be Buyer’s responsibility.  SELLER’S WARRANTY DOES NOT APPLY WHEN ANY PHYSICAL OR CHEMICAL CHANGE IN THE FORM OF THE 
PRODUCT IS MADE BY BUYER.   
THE FOREGOING EXPRESS WARRANTY AND REMEDY ARE EXCLUSIVE AND ARE IN LIEU OF ALL  OTHER WARRANTIES AND REMEDIES; 
ANY IMPLIED WARRANTY AS TO QUALITY, FITNESS FOR PURPOSE, OR MERCHANTABILITY IS HEREBY SPECIFICALLY DISCLAIMED AND 
EXCLUDED BY SELLER. 

 

THIS WARRANTY IS VOID IF SELLER IS NOT NOTIFIED IN WRITING OF ANY REJECTION OF THE GOODS WITHIN ONE 

(1) YEAR AFTER INITIAL USE BY BUYER OF ANY POWER RIVETER OR NINETY (90) DAYS AFTER INITIAL USE OF ANY OTHER PRODUCT. 
 
Seller shall not be liable under any circumstances for incidental, special or consequential damages arising in whole or in part from any breach by Seller, AND SUCH 
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES ARE HEREBY EXPRESSLY EXCLUDED.

Declaration of Conformity

 

We, Cherry®

 

Aerospace, 1224 E. Warner Ave., Santa Ana, CA 92705

 

declare under our sole responsibility that the product 

type 

G83

 

Serial No.- 

to which this declaration relates is in conformity with the following standards 

EN292 part 1 and part 2 

ISO 8662 Part 1 

ISO 3744 

following the provisions of the Machine Directive 89/392/EEC  

(as amended by Directive 91/368/EEC) and 93/68/EEC 

Santa Ana, CA -  

date of issue 

Original certification and signatures on file 

 

 

 

TM-G83  

Rev.: E 

DCR# 15-0393 
Date: 04/30/15 

Supplier’s Federal Identification Code: 11815   

WARRANTY

LOCTITE

® 

is a registered trademark of Henkel Corporation 

DEXRON

®

 is a registered trademark of GM corporation. 

PARKER

®

 is a trademark of Parker Hannifin Corporation 

LUBRRIPLATE

®

 is a trademark of Fiske Brothers Refining Co. 

Содержание 5130-01-435-3507













Отзывы: