RB14604
│
17
2-1
Top Cover Installation
Figure 8 Front top cover installation
1. Align the guide pins of this cover with the grooves on the chassis base, and slide the cover in (two guide pins for both sides).
NOTE:
Ensure that arrows on the cover indicating the back of chassis.
2. Secure it with two screws as shown.
Figure 9
Rear top cover installation
1. Align the guide pins of this cover with the grooves on the chassis base, and slide the cover towards the front panel until it locks
into place (three guide pins for both sides).
2. Secure it with one screw as shown.
