Chemtronics MDRBI303 Скачать руководство пользователя страница 4

1. Overview 

This  product  is  a  module  developed  for  effective  human  or  object  recognition  using  the  built-in  RADAR 

sensor.  The  core  functionality  of  this  radar  sensor  is  to  transmit  frequency  modulated  continuous  wave 

(FMCW) signal via one of the transmitter channel (TX) and receive the echo signals from the target object on 

the three receiving channels (RX). 

The  Color  sensor  is  a  high  resolution  color  and  IR(red,  green,  blue,  clear  and  IR)  light  sensor  which  can 

transform illuminance(light intensity) to a digital signal output. With the RGB color sensor, the brightness and 

color temperature of backlight can be adjusted based on ambient light source that makes the panel look more 

comfortable  for  human  eyes.  Additionally  it  can  be  used  for  detecting  light  source  type  as  it  reports  the  IR 

content of the light. The wide dynamic range also allows for operation in short distance detection behind dark 

glass such as a cell phone. 

The  IR  Receiver  are  miniaturized  receiver  for  infrared  remote  control  system.  The  Pin  Photodiode  and 

preamplifier are assembled on lead frame. The epoxy package is designed as IR filter. and this IR Receiver has 

excellent performance even in disturbed ambient light application and provides. 

The microphone mounted on top of the product is a compact low power bottom port silicone microphone with 

a  single  bit  PDM  output.  This  device  has  great  performance  and  is  suitable  for  applications  such  as  music 

recorders and other suitable electronic devices. 

The  accelerometer  is  a  process  micromachine  accelerometer  that  has  already  been  used  in  production  in 

rugged  and  mature  manufacturing  belonging  to  the  "femto"  family  of  ultra-low-power,  high-performance  3-

axis linear accelerometers. 

 

Features 

 

RF-Frontend  at  60  GHz  covering  frequencies  from  58.0  to  63.5  GHz  with  one  TX  and  three  RX 

channels 

 

Antennas integrated in the redistribution layers of the package 

 

CW and FMCW mode of operation 

 

Color(R,G,B,W,IR) Sensor with I2C Interface 

 

D-MIC(DOS3527B-R26-NXF1) 

 

receiver for infrared remote control system. 

 

Micro-machine accelerometer belonging to the "femto" family. 

 

80MHz Oscillator 

 

Applications 

 

Smart TV appliances 

 

The  Motion  Detection  Sensor  Module  specified  is  a  product  that  is  installed  in  the  application  after 

being mounted on the frame in actual use. 

Содержание MDRBI303




















Отзывы: