ChemoMetec NucleoCounter, Руководство пользователя

Страница: 31 / 76

4 Installation and Start-up
14
4 Installation and Start-up
4.1 Power on, power off
The NucleoCounter is powered by a 12VDC external power supply.
To connect the power supply to the NucleoCounter, connect it to
the DC socket (see Figure 7), and plug the mains power cord of
the power supply into a wall outlet.
Figure 7. Connecting the 12VDC power cord plug to the
NucleoCounter
The NucleoCounter can now be turned on and off by pressing the
“
On/Off
” button on the front panel.
4.1.1 Starting up
Caution! During start-up the NucleoCounter performs a self-check.
Never insert or remove any cassette during the start -up.
During start-up a brief noise is heard as the actuator motor is
activated for test purposes. This is a part of a normal start-
up procedure. While the NucleoCounter is starting up the
display shows for a few seconds instrument details as follows:
1
2
3
4 NucleoCounter
V4.xx 2005-MM-DD
S/N: 002-01
Figure 8. The start-up display