2000W
: For high heat function – Press this switch while the O/I switch and the 1000W switch are
in the ON position. The heater will provide high heat level. Press once again to stop the high heat
level function.
Temperature Control
: To adjust the temperature to your individual requirements, turn the
temperature control dial to the right (clockwise) to increase the temperature and to the left
(counter clockwise) to decrease the temperature. When desired ambient temperature is reached,
the heater will automatically stop heating. When the ambient temperature drops below the desired
temperature 2°C, the heater will resume heating.
Note
: When the O/I switch is turned off, all other functions will stop even though the switches
may be in the ON position.
Maintenance:
WARNING:
Completely disconnect power before attempting any maintenance or cleaning,
to reduce the risk of fire or electric shock. Maintenance should only be performed by a
certified technician.
Cleaning:
Before cleaning any parts of the fireplace make sure to first turn off the controls and then
unplug the unit from power source.
CAUTION:
Wait until the unit has completely cooled before attempting any cleaning.
Cleaning Glass Panel
: Remove dust with clean dry cloth. Remove fingerprints and
other marks from glass door by using a clean damp cloth. Do not use abrasive cleaners or
spray liquids on glass door surfaces.
Metal and metal painted parts should be cleaned with clean damp cloth only. Do not use
abrasive cleaners or spray liquids on these surfaces.
