Press the
button, continue to press the + button or the – button to set the temperature.
Press the OK button to finish one day setting, continue to repeat before till finish one week and
turn off.
Mention: 1.if
have not lighten, so this date timer setting void.
2.
if you not press ok button ,it will just Set the cycle on that day
3.
Press
button 5s when the fire is turn off will reset all timer and temperature setting.
4.
If there is no any operation after 15 seconds, display Light will off
- Protection against overheating:
Warning: To avoid overheating, do not cover the heater.
This protection allows the heating to stop before overheating. This system is activated when it gets too hot in the room or
when the air vents are blocked. For security reasons, heat does not put on automatically. To restart it, unplug the cord from
the electrical outlet, wait 15 minutes then reconnect the power cord into the outlet.
Interchangeable front panel:
By purchasing a fireplace Chemin'Arte you have opted for modular fireplace. If you want to buy a new front panel for your
fireplace, do not hesitate to contact us or visit our website: www.cheminarte.com
Ceramic logs and stones and other decorative accessories:
The ceramic logs and stones and other accessories sold under the brand Chemin'Arte are objects of decoration. They
should be installed along the track bright and must be handled carefully to avoid damage.
Maintenance and change light bulbs leds:
- Repairs, replacement parts and work on important security features of your fireplace Chemin'Arte, should be performed
only by licensed specialists.
- Only LED bulbs can be changed by the user, after disconnecting the fire completely and after waiting 15 minutes at least
until it is fully cooled.
However, the LED bulbs have a lifetime average of about 100,000 hours, you should not have to make
replacements.
- Once the fireplace and the bulbs have cooled, lift the fireplace and the floor-flat.
- Remove the front panel of the fireplace and then unscrew the panel located below the light rail. Once the panel is
unscrewed, you can access the bulbs LEDs.
- Once the LED light bulb changed, tighten the center panel, then hang the body of the fireplace wall. Finally, hang the
body in front of the fireplace.
Cleaning the body of fireplaces:
Always remove the fireplace and let it cool before cleaning or servicing.
The bodies of Chemin'Arte fireplaces are cleaned using a soft cloth to dust, damp cloth. Never use alcohol, detergent,
paint thinner or other chemicals.
Warranty:
Chemin'Arte fireplaces are guaranteed 2 years parts and labor.
Contact:
If you have any questions or comments about the use of fireplaces Chemin'Arte, please contact us at:
[email protected]
EFYDIS distributes in France and Europe, the brand Chemin'Arte.
Technical features :
Works on alternative 230V courant.
2 heating devices of 1000W each.
Fuse of 13A.
Works with multicoolor leds