ChemDAQ Steri-Trac, Руководство по эксплуатации

Страница: 20 / 28

20
correctly with reliable test gas. Since ChemDAQ specializes in detection of sterilant gases, which are
generally very reactive, factory calibration not only is the least burden on the end user, but is also the
most reliable method for ensuring reliable calibration.
Cleaning
The ChemDAQ monitor may be cleaned by wiping with a damp cloth. Avoid using any solvent based
cleaners or other harsh chemicals.
CAUTION - Do not expose the unit to splashing, spraying, or
dripping water, otherwise, damage to the internal components may result.
Service Contact
When factory service is required, contact ChemDAQ Incorporated Service Department at (800) 245-
3310. Ext. 310, or EMAIL techsupport@chemdaq.com.
The shipping address for service is:
Service Department
ChemDAQ Incorporated
Service/Repair
300 Business Center Drive
Pittsburgh, PA 15205
Emergency Response
ChemDAQ is not able to recommend specific actions to be taken in the event that the ChemDAQ Gas
Monitoring System initiates an alert of a potential exposure. The emergency procedures will vary from
location to location and will be described in each site’s emergency action plan as prescribed by OSHA.
The ChemDAQ Gas Monitoring System provides a key element in ensuring the safety of personnel
working with toxic gases and it is important that the Emergency Action Plan be updated to as to
incorporate what actions should be taken in the event of an alarm. These actions may include remedial
functions or evacuation depending on gas concentrations and will depend on the policy of that particular
facility. The Emergency Action Plan should also describe what steps should be taken to assure that the
environment is safe before resuming normal activities after a gas exposure alert.