CHEMAT TECHNOLOGY KW-4A, Руководство пользователя

Страница: 7 / 10

Page | 7
um” Button one time only to turn on the vacuum.
low speed or Speed I during
I.
will spin at
speed or Speed II for the time period pre ‐ set
by Timer II.
bstrate must be applied at the low speed or
Speed I, not at the high speed or Speed II.
8. Place the bowl cover over the bowl.
9. When cycle ends, press “Vacuum” button to turn the vacuum off.
10. Remove the bowl cover.
11. Remove the substrate. Note: make sure that “Vacuum” button is
off in order to remove substrate.
12. Repeat steps 3 ~ 11 for more samples.
13. Turn “Power” switch off when all spinning operations are finished.
4. Place the substrate on the sample chuck and make sure the substrate is
centered before spinning operation begins.
5. Press “Vacu
Coating material must be ready for substrate before “Start” button is pressed
since coating material must be applied at the
the time of spin cycle period set by Timer
6. Push the “Start” button to start spinning operation. The substrate
the low speed or Speed I for the time period pre ‐ set by Timer I.
The Substrate will spin at high
7. Coating material applied to the su