3
EN
Make sure there is at least 20 cm of space
above and at least 5cm of space on each side
of the unit.
Do not place this unit close to strong
magnetic field.
Do not place the unit on the amplifier or
receiver.
Don’t place this unit close to the damper, or
the moisture will affect the life of the laser
head.
Should any solid object or liquid fall into
the system, unplug the system and have
it checked by qualified personnel before
operating it any further.
Do not attempt to clean the unit with
chemical solvents as this might damage the
finish. Use a clean, dry or slightly damp cloth.
When removing the power plug from the wall
outlet, always pull directly on the plug, never
yank on the cord.
Depending on the electromagnetic waves
used by a television broadcast, if a TV is
turned on near this unit while it is also on,
lines might appear on the TV screen. Neither
this unit nor the TV are malfunctioning. If you
see such lines, keep this unit well away from
the TV set.
No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Changes or modifications to this unit not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate the equipment.
NOTE:
•
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications.
• However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equip
ment and receiver.
- Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/
TV technician for help.
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
1) this device may not cause harmful
interference, and
2) this device must accept any interference
received, including interference that may
cause undesired operation.
• Shielded cables must be used with this unit
to ensure compliance with the Class B FCC
limits.
Correct Disposal of this product. This
marking indicates that this product
should not be disposed with other
household wastes throughout the EU.
To prevent possible harm to the environment
or human health from uncontrolled waste
disposal, recycle it responsibly to promote
the sustainable reuse of material resources.
To return your used device, please use the
return and collection systems or contact the
retailer where the product was purchased.
They can take this product for environmental
safe recycling.
The marking label is pasted on the bottom of
the equipment.
iPod, iPhone and iPad are trademarks of Apple
Inc., registered in the U.S. and other countries.
“Made for iPod”, “Made for iPhone” and “Made for
iPad” mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone
or iPad respectively, and has been certified
by the developer to meet Apple performance
standards.Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
All trademarks are the property of their respective
owners and all rights are acknowledged.
