Chef's LILIUM, Руководство пользователя

Страница: 8 / 16

7
Mounting instructions
Mounting steps ;
1- Drill the required holes in accordance with the distances specified in Figure A4.
2- Drive 2 x Ø8 mm threaded inserts (1) and 2 x Ø7 threaded inserts into the wall.
3-Drive 4x50 rysb screws into the threaded insert making sure that the spacing between the wall
and the screw head is 2-4 mm.
4- Lift the product, slide the screw head into the large hole on the motor connection plate & wall
mounting plate and slightly push the product against the wall and downwards, make sure that screw
heads are properly inserted into the hole.
5- Open the product cover and remove 4x50 rysb( 1 ) screws as shown in Figure A5.
6 - Check the steps you applied and continue with the flue assembly.
Figure A5
Section 5B
Range mounting
1- Ø8 mm threaded insert
2- 4 x50 rysb screw
3- Motor connection plate & wall mounting plate
4- Panel
1
2
3
4
Figure A6
Bottom view