Electric Induction hobs Chef’s EH-IH545
21
Fig 11.: Selecting the timeout
If the key [+TIMER_KEY] or [-TIMER_KEY] associated with the timer is held down,
the change speed is increased automatically or the increases are done in 5 by 5 (see
programming chapter). This makes possible to reach the desired time setting more
quickly.
If the time is not selected before 10 seconds, the timer is switched off.
If the selected time is “00” after 10 seconds the timer is switched off.
13.3. Starting Timer Countdown
The countdown starts 5 seconds after the last operation over the [+TIMER_KEY] or [-
TIMER_KEY] key. A beep sounds and the timer display stop blinking and also led heater
stops blinking if any power is selected.
The last minute will be displayed in seconds.
13.4. Changing the time
When the timer is in countdown the user can change the time at any time by
selecting the heater and touching the timer [+TIMER_KEY] or [-TIMER_KEY] key, the
countdown stops and the timer changes to time selection status waiting a time selection.
13.5. Timer Countdown End
When the time set on the timer has run out, the timed heater is switched off, the timer
display and the timed heater led starts blinking and a timer alarm beep sounds for one
minute.
The timer alarm can be cancelled by the user at any time, even during the first
minute of the alarm. When the timer is in alarm status, by pressing any key of the touch
control the timer is switched off.
13.6. Switching off the timer
To cancel the operation of the timer, select the time value of “00” using the
[-TIMER_KEY] key or pressing the [+TIMER_KEY] and [-TIMER_KEY] keys at the same
time.
