8
CHEF’S KNIVES AND PARING KNIVES
The blade of a well designed chef’s knife is curved continuously from the blade tip to the end
near the handle so that, with a rocking action on a cutting surface, the entire blade length will
cut cleanly. Chef’sChoice
®
will sharpen the entire blade uniformly, avoiding a swale common to
other sharpening methods. If your chef’s knife has a heavy bolster near the handle extending
to the edge, a commercial grinder can modify or remove the lower portion of the bolster so that
the bolster will not interfere with proper cutting action of the knife.
Chef’sChoice
®
Professional Model 110 will sharpen the entire cutting edge from tip to
bolster or handle. For this reason when using paring knives, it is essential to exercise extreme
care to keep fingers away from the incredibly sharp edge near the handle.
SPORTING AND POCKET KNIVES
The Professional 110 is the ideal sharpener for your favorite sporting and pocket knives. It will
put the same incredibly sharp Trizor
®
edges on the entire length of these blades from the tip to
the bolster. See “Suggestions” section.
NORMAL MAINTENANCE
NO
lubrication is required for any moving parts, motor, bearing surfaces or sharpening surfaces.
Your sharpener may be cleaned by carefully wiping with a damp cloth. Do not use detergents
or abrasives.
To clean metal dust that may accumulate in the PRE-SHARPENING section, simply remove the
circular plastic plug that is located on the underneath side of the sharpener. Shake out the metal
dust and replace plug. You may wish to do this once every eighteen months with normal usage
or more often with heavy use.
SERVICE
In the event post-warranty service is needed, return your sharpener to the EdgeCraft factory
where the cost of repair can be estimated before the repair is undertaken. Please include your
return address, daytime telephone number and a brief description of the problem or damage on
a separate sheet inside the box. Retain a shipping receipt as evidence of shipment and as your
protection against loss in shipment. Outside the USA, contact your retailer or national distributor.
Assembled in the U.S.A.
www.edgecraft.com
U.S. Patents 4,807,399, 4,897,965, 5,005,319, D303,209 and D328,410. Other U.S. and foreign patents pending.
Chef’sChoice
®
, EdgeCraft
®
and Diamond Hone
®
are registered trademarks of EdgeCraft Corporation, Avondale, PA.
© EdgeCraft Corporation 2006
F0620
C118200
®
Send your sharpener (postage prepaid) to:
EdgeCraft Corporation
825 Southwood Road, Avondale, PA 19311
Customer Service 1-800-342-3255 or 610-268-0500
