5
Cleaning & Maintenance
Before cleaning disconnect the blender from the electricity supply
Be careful when touching the blade
– It is extremely sharp!
Clean the inside of jug / lid / sound enclosure with warm soapy water.
DO NOT submerge the jug / the motor base in water or use water
sprays to clean it. They should only be cleaned with soft cloth.
Dry before the product is stored.
Always clean & check your Chefmaster Blender daily. Inspect the jug
and blade assembly to ensure they are in good condition. DO NOT use
broken, chipped, or cracked jug. DO NOT use wear, nicks, or broken
blades.
Troubleshooting
Condition
Possible Cause
Solution
The unit is
plugged in but
not working
1. The unit is not switched on
2. The plug or lead are damaged
3. The fuse has blown
4. Overheat protection is
triggered
5. The jug is not properly
installed
1. Check the unit is correctly
plugged in and switched on
2. Contact your Chefmaster
distributor
3. Replace the fuse
4. Place the unit in a
ventilated place, cool it for
about 20 minutes, then press
“reset” button on the base of
motor
5. Place the jug on motor base
until hearing
a “click” sound
Excessive
vibration
The motor base is not placed
evenly
Place the motor on a flat &
stable surface
The jug is not installed properly
Clean the motor base with soft
cloth & Install the jug again
Excessive amount of ingredients
is put in the jug
Adjust the amount of
ingredients
Overflow
The amount of liquid exceeds
the specification
Adjust the amount of liquid to
around 1.5-1.8L
Lid is not installed properly
Install the lid again, ensure
the jug is tightly sealed
