13
14
11. To discard spent grinds, remove the portafilter and let cool. Hold the portafilter basket
in place by flipping up the portafilter basket retention clip to partially cover the lip of the
basket and portafilter. Press on the clip with your thumb to hold the basket in place as
you empty the grinds.
NOTE:
Be sure to clean the froth dispensing tube after every use
following the directions on p. 18.
HOW TO MAKE A LATTE
A latte is a larger coffee drink made with mostly steamed milk and a little espresso. When
using the latte presets, there is no need to manually froth the milk; it will occur automatically.
1. Make sure unit is plugged in.
2. Turn unit on by pressing the power button located on the side of the unit.
3. Fill water reservoir as directed on p. 9.
4. Fill the milk reservoir with milk to between the “Min” and “Max” lines and insert it into the
unit. (If the milk reservoir is not on the unit, the latte function will not work.)
5. Set the froth strength to Standard.
6. Place a large heatproof cup or mug on the metal coaster over drip tray.
NOTE:
Be sure to
use a large mug, especially with a double latte, which can yield as much as 10 oz.
7. Use the silver froth tube lever to position the froth dispensing tube over the cup.
8. Fill the portafilter with ground coffee and attach it to the brew head as directed on
p. 10 and p. 11.
9. Choose whether to brew a single or double latte by pressing the appropriate button. The
button will blink to signify the unit is preheating. The button will turn solid during the brew
cycle. When brewing is complete, the unit will beep three times, and your latte will be
ready to enjoy.
HOW TO MAKE A CAPPUCCINO
A cappuccino is a delicious beverage made with equal parts espresso, steamed milk, and
froth. When using the cappuccino presets, there is no need to manually froth the milk; it
will occur automatically.
1. Make sure the unit is plugged in.
2. Turn the unit on by pressing the power button located on the side of the unit.
3. Fill the water reservoir as directed on p. 9.
4. Fill the milk reservoir with milk between the “Min” and “Max” lines and insert it onto the
unit. (If the milk reservoir is not on the unit, the cappuccino function will not work.)
5. Set the froth strength to Standard.
6. Place a heatproof cup or mug on the metal coaster over the drip tray.
7. Use the silver froth tube lever to position the froth dispensing tube over the cup.
8. Fill the portafilter with ground coffee and attach it to the brew head as directed on
p. 10 and p. 11.
9. Choose whether to brew a single or double cappuccino by pressing the appropriate
button. The button will blink to signify the unit is preheating. The button will turn solid
during the brew cycle. When brewing is complete, the unit will beep three times, and
your cappuccino will be ready to enjoy
10. When the brew cycle ends, the unit will go into standby mode and will be preheating
in the background. If no button is pressed within 20 minutes, it will go in to sleep
mode.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
