Chefman RJ27, Руководство пользователя

Страница: 12 / 16

USA
9
AFTER SALES SUPPORT
888-315-8407 customerwarranty@rjbrands.com MODEL: RJ27
Always unplug your Chefman® 500-Watt Blender from the electrical outlet before
cleaning. The blender is made of parts that are easy to clean. Before first use and after
every use, clean each part thoroughly. Periodically check all parts before reassembly. If
any part is damaged or blender jar is chipped or cracked, DO NOT USE BLENDER.
1. Twist off the locking ring by turning counterclockwise.
2. Remove the blender jar from the motor base by lifting straight up and away.
3. Remove the cutting assembly and rubber gasket. Wash in warm soapy water,
rinse, and dry thoroughly.
CAUTION: Handle the cutting assembly carefully. It is SHARP and may cause injury.
Do not attempt to remove blades from cutting assembly.
5. Remove the blender jar cover and the measuring filler cap. Wash in warm, soapy
water; rinse and dry thoroughly.
6. The blender jar must be washed in warm soapy water, rinse and dry thoroughly.
7. Finally, wipe the motor base clean with a damp cloth to remove any residue,
and dry thoroughly. NEVER submerge the motor base in water or other liquid,
or place in a dishwasher.
Tip: You may wish to clean your blender cutting assembly as follows:
• Squirt a small amount of dishwashing liquid into assembled blender jar and fill
halfway with warm water.
• Run on the pulse setting for 15 seconds.
• Repeat using clean tap water.
• Empty blender jar and carefully disassemble parts.
• Wash cutting assembly, gasket and locking ring in warm, soapy water.
• Rinse and dry all parts thoroughly.
Cleaning & Maintenance