Chefman RJ14, Руководство пользователя

Страница: 8 / 16

USA
5
AFTER SALES SUPPORT
888-315-8407 customerservice@chefman.com MODEL: RJ14-12SS-P SERIES
Operating Instructions
FIRST TIME USE
1. Remove packaging materials, labels and stickers from the coffee maker.
2. Clean the coffee maker thoroughly before using for the first time.
Note: To clear the coffee maker of any residue, fill to the maximum water level
mark on the side of the tank with fresh water. Run a full brewing cycle. Repeat
this procedure at least once.
USING YOUR COFFEE MAKER
Use this coffee maker to brew coffee only.
1. Open the lid.
2. Place the filter basket in the coffee maker. Make sure the tab of the filter basket
fits in the opening of the coffee maker.
3. Insert the permanent filter or a number 2 cone paper filter into the filter basket.
Do not use the permanent filter with a paper filter as water will not flow through
the paper filter and the filter basket correctly.
Caution: Do not operate unit without filter basket in place.
4. Add the desired amount of ground coffee into the filter. For 12 cups of coffee add
45g-60g of ground coffee into the filter.
5. Fill the carafe with the desired amount of water.
6. Pour the water from the carafe into the water tank. Check the water level
indicator inside the water tank. Do not overfill the coffee maker.
7. Close the lid and place the carafe on the warming plate.
8. Insert the power plug into a suitable 120V AC wall outlet.
SETTING TIME
1. When plugging in the unit, "AM" and "12:00" will appear flashing on the LCD
display.
NOTE: "PROG" function cannot be activated until the unit display time has been
set. During this time LCD will display ERR when attempting to program.
2. To set the display clock, press HOUR button to select the hour. When setting the
time, every time you reach "12:00", the AM and PM will change.
3. Hold the HOUR button to change the time.
4. Once you have finished setting the time, the displayed time will flash twice and
then stop flashing, indicating that the display time is now set. To change the time,
simply hold down the HOUR button until it starts flashing again. Then, continue to
press the button to change the clock.