4
Getting To Know Your Food Processor
USING YOUR KETTLE FOR THE FIRST TIME
Fill kettle to the maximum level mark with fresh tap water. Boil and empty the
kettle then wash the reservoir with water, repeat the above 2 times.
1. Pull out the power cord from the compartment under the base, plug into a
power outlet.
2. Open the lid then fill water into the kettle.
3. Never allow the water to fill above the maximum level or lower than the
minimum level indicated in the interior of the appliance.
4. Close the lid and place the kettle back on the base unit.
5. Switch the kettle on by pressing the switch to the “I” position, the light will
illuminate to indicate the kettle is heating.
6. The kettle will automatically switch to the off “O” position once the water has
boiled and the indicator light goes off.
NOTE: Wait 30~60 seconds if you need to heat the water immediately after a
boiling cycle.
The power source will only work if the kettle is placed directly on the base unit.
